-
High Build, Alkyd, direct-to-metal, fast dry, single-coat, applicator friedly (Brush, Roll, Spray), tough enough for use as a floor enamel -
High Build, Alkyd, direct-to-metal, fast dry, single-coat, applicator friedly (Brush, Roll, Spray), tough enough for use as a floor enamel Low VOC (less than 340 g/l) Low HAP's values
-
Heavy Duty Primer for long term protection of Structural Steel, Non Lift, Fast Dry, Weld-Thru properties, excellent adhesion.
-
Universal Alkyd Primer, Fast Dry Corrosion Inhibitor, Zero HAP'S, Low VOC (Less than 340 g/l)
-
Alkyd Enamel, Water Reducible, Fast Dry, High Gloss, Applicator Friendly (Brush, Roll, Spray), for use on Bare Metal or Primed Surfaces, mild Corrosion Resistance, (VOC less than 340 g/l)
-
Alkyd Primer, Water Reducible, Fast Dry, Applicator Friendly (Brush, Roll, Spray), for meatl surfaces that require superior adhesion and flexability, superior sag resistance, (VOC less than 340 g/l)
-
Versatile, Semi-gloss, Waterborne Acrylic, provides excellent weathering resistance, color retention, over corrosion resistant primers. Can be placed on masonry substrates.
-
Industrial Grade Acrylic Primer, Waterborne, provides resistance to flash rusting and excellent resistance to chemical fume
-
Graphite reinforced, direct-to-metal primer
-
Waterborne Acrylic Primer with inhibitive pigments to prevent flash rusting with excellent chemical fume resistance. Low VOC (Less than 100g/l) for SCAQMD Certifications
-
Waterborne, semi-gloss, acrylic finish with excellent weathering chacteristics and very good gloss and color retention and resistance to chemicals
-
Waterborne, High Gloss, acrylic terpolymer, single coat direct-to-metal protection, excellent wethering chacteristics, very good chemical resistance
-
Single Component, Durable, high performance direct-to-metal acrylic coating, excellent weathering chacteristics and chemical resistance, Low VOC (Less than 100 g/l) for SCAQMD Certifications
-
Waterborne, semi-gloss, acrylic finish with excellent weathering chacteristics and very good gloss and color retention and resistance to chemicals (Meets 100 g/l limitations) for SCAQMD Certifications
-
Glass-flake reinforced, epoxy novolac lining, outstanding chemical resistance at elevated temperatures, outstanding thermal shock resistance
-
Amine-cured epoxy, versatile chemical resistance, good for fuel exposure
-
Single-coat, airless-applied, ultra-high build, use on steel and concrete substrates subjected to aggressive chemical fume and spill exposure, excellent thermal shock and abrasion resistance
-
A micaceous iron-oxide filled primer used as a holding primer (maintain blast cleaning), suitable for new tanks and relines,excellent surface wetting chacteristics and quick cure for handling
-
High solids epoxy, chemical rsistance to molten sulfur at temperatures up to 300 Deg. F, special fillers also assist in the unloading of molten sulfur resulting in minimal heal remaining after unloading
-
Solventless, epoxy lining compound for wtaer, potable water, wastewtaer, seawater, fuels, crude oils, other solutions, airless spray applied, single coat lining for tanks or other storage vessels
-
Highly cross-linked epoxy lining, extraordinary chemical resistance and versatility, unique blend of resin chemestries make it highly resistant to a variety of aggressive cargos. LT version sures down to 35 Deg. F
-
High solids, modified epoxy, multi-service, protective lining, excellent chemical resistance
