-
We carry a large selection of static mixer tips designed for the application of each of our epoxy and urethane products using plural component cartridges. Please call for proper mixer and product use. -
It takes a special mixing tip to utilize our bladder style injection port. We carry additional mixier tips in our stock available for purchase with every injection port.
-
Five Star Novolac Structural Concrete? is a three component, 100% solids, highly chemical resistant epoxy repair material for the construction or repair of curbs, trenches, floors and pads. Five Star Novolac Structural Concrete? is designed for aggressive chemical environments that may be exposed to concentrated acids, alkalis, corrosives or solvents. -
We can work with your project designers to supply the proper structural lumber capable of handling the weights of our epoxy grout and structural concretes.
-
We manufacture various shapes of 1#, 2#, and 3# density styrofoam for the forming of our grouting products. These shapes include square, recangular, and chamfer style for safety edging of formed epoxy grout applications. Custom shapes for anchor bolt blockouts in new concrete foundations, etc. Call with your design and we'll recommend a product.
-
Summerset is an additive which extends the working time and retards the set of certain Five Star grouts and rapid setting hydraulic cement products. Summerset should be used when working in hot weather or placing a large amount of material at one time to provide ample working time to place and finish the material. For use only with specific Five Star rapid setting products which call for Summerset by name such as Five Star Structural Concrete , Five Star Instant Grout, and Five Star Highway Patch. Characteristics Include: - extended working time in warmer weather 30 to 40% - does not effect the physical properties of the product -
A powerful oil eating microbial based cleaning solution ideal for removing and remediating all types of hydrocarbon based products. Surface will remove oil and deep oil stains in a variety of applications where oil contamination is a challenge.
-
A simple way to attach wooden formwork to concrete substrate. Does not stress the concrete during application and can be removed after completion of project. Drilled holes can be filled with our ProPoxy 400 unicartridge epoxy product and sanded to a smooth finish. Will help eliminate locatized stress cracking at form anchoring areas.
-
The Grabber Mobile Fall Protection System provides two overhead anchor points anytime, anywhere. The Grabber meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory. The versatile Grabber is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2? and the unprecedented maximum height of 34'. Characteristics: Two (2) Fall Arrest Anchor Points for Simultaneous Tie-off 30' Maximum Height Supports Wide Range of Uses 100% Hydraulic Mast & Counterweight for Ease of Use & Quick Setup Time Incomparable Mobility & Interstate Travel 6' Wide Frame Makes Tight Areas Accessible Ships Ready to Go No Assembly OPTIONS: Friction Drive Mobility Package (M1000) adds wireless, independent mobility to the Grabber Mobile Fall Protection System (2)electric drive motors drives its wheels, allowing you to position the Grabber without a vehicle attached. Note: Designed to be used on smooth level concrete surfaces. The Grabber Wireless Control Option (W1000) has taken all the functions of the standard corded Grabber remote and shrunk them into a compact wireless control. This state of the art unit provides all the needed safety features as well as seamless, instant control of the Grabber with a range of up to 100ft. The Grabber Solar Charger (S1000) harnesses the power of the sun to maintain the battery of the Grabber! Assuring maintenance-free performance, this system features high efficiency crystalline solar cells to provide greater power and state of the art electronics to control charging. The 60 Watt crystalline solar panels are weatherproof and made with a rugged aluminum frame as well as shatterproof tempered glass for superior durability. The charge controller protects the Grabber battery from overcharge and discharge to ensure years of worry-free use. And best of all, the system is always working. The Spare Tire Kit (ST1000) can be added to any existing unit. It can be ordered at the time of Grabber purchase or as a separate component later on. It is easily installed with a few hand tools. This option includes the spare tire and all needed hardware to mount the spare tire to an existing 1240 or 1250 Grabber model. -
A polyethylene tube that extends the application distance from the injection port for pressure injection of our resin systems.
-
A polyethylene tube that extends the application distance from the injection port for pressure injection of our resin systems.
-
Top-Cast® is a water-based, top-surface retarder which does not require covering with plastic for protection. It is available in 12 depths of etch, each one color and number coded for safety and convenience. FEATURES Comprehensive range of etch depths Color and Number coded products Requires no plastic covering Low odor USE Ideal for cast-in-place flatwork and the top surface of pre-cast concrete panels. The wide selection of grades available provides a comprehensive range of effects, from a simulated light acid wash or sand blast finish up to full exposure of 1-1/4 in. (32 mm) aggregate. -
Wearcoat 480NY is a two component, non-yellowing, light stabilized, 100% solids high performance epoxy floor coating. Wearcoat 480NY is a non-yellowing, high build, 100% solids epoxy floor coatings with very good chemical resistance properties, zero VOC, extremely low odor and a wide range of film thickness. Wearcoat 480NY is ideally suited for decorative floors that require a high build clear that is light stable.
-
Wearcoat 100 Two package aliphatic urethane, polyester type, finish coating for exterior applications and can be applied over a wide variety of properly prepared and primed substrates including structural steel, cold rolled steel, aluminum, concrete, plastics and galvanized steel. WEARCOAT 100 has non-yellowing, non-chalking properties combined with excellent abrasion, chemical, solvent and good heat resistance properties. It provides excellent gloss retention and will continue to retain a high gloss through many years of service.
-
Wearcoat 106 MCU is recommended for use in warehouse and factory facilities where a protective coating is needed to stop dusting and wear of concrete due to traffic and chemical attack. Wearcoat 106 MCU forms an extremely hard, chemical resistant film which has exceptional wetting properties to porous substrates. It will penetrate concrete very readily and will actually develop a reinforcing bond at the substrate interface. - Excellent adhesion to concrete and wood. - Cures quickly and at low temperatures. - High chemical resistance and abrasion resistance. - Very effective for use as a form release on concrete forms
-
Wearcoat 440 is a 100% solids industrial epoxy floor coating intended for use as a primer, broadcast binder, or topcoat. - Economical coating for general industrial flooring use. - Clear formulation makes and excellent high-build primer or broadcast binder - Very high resistance to amine blush. - Available in a fast set version as Wearcoat 440FS.
-
Wearcoat 480 is a 100% solids, self-leveling, epoxy floor coating with very good chemical resistance properties, zero VOC, extremely low odor, and a wide range of film thickness. - Superior self-leveling creates a smooth and glass-like finish. - Can also be used as an intermediate coat to level floors with a high profile surface preparation. - Available in a fast set version as Wearcoat 480FS.
-
Wearcoat 490 is a two component polyamide epoxy primer for use on cementitious substrates. - Very surface tolerant and can be applied in damp environments. - Long recoat window allows excellent topcoat adhesion. - Usualy top coated with Wearcoat 480, Wearcoat 491, or Wearcoat 100.
-
Wearcoat 491 is a two component high solids polyamide epoxy finish coat. - Very surface tolerant and can be applied in damp environments. - Economical coating with good abrasion and chemical resistance. - Use with Wearcoat 490 or Wearcoat 499 primers.
-
Wearcoat 499 is a two component polyamide epoxy primer with corrosion inhibiting pigments for use on metal substrates. - Very surface tolerant and can be applied in damp environments. - Easy to apply by brush, roller, or spray. - Requires a Urethabond topcoat for exterior use.
-
U-104 is an aluminum filled, solvent-based,single component moisture-cure urethane for use as a primer over metal or concrete. It is estimated that over 40 million tons of steel corrodes per year causing a loss of over 70 billion dollars. U-104 from Coatings For Industry provides superior protection against corrosion, even over a rusty surface. The extremely small molecules of the moisture-cure urethane penetrate and seal the smallest voids while the high loading of aluminum pigment prevents further penetration of corrosive environments. This coating has found use on bridges, transportation vehicles, storage tanks, and metal buildings. Two coats of U-104 shows extreme levels of corrosion protection in ASTM B-117 Salt Fog testing and real world experience. - One component; easy to apply - Up to 10x the life of a coventional alkyd primer - Over 30 years of proven performance on structural steel
-
Urethabond 109 is a two-component zinc rich moisture cure urethane primer for use on metal substrates in severely corrosive salt environments or anywhere cathodic protection is desired. - 92% zinc in dry film provides long term sacrificial corrosion protection. - Easy to apply with brush, roller, or spray. - Prolonged life when topcoated with Urethabond 104 and/or Urethabond 111.
-
URETHABOND 111 has non-yellowing, nonchalking properties combined with excellent abrasion, chemical, solvent and good heat resistance properties. It provides excellent gloss retention and will continue to retain a high gloss through many years of service. URETHABOND 111 can be applied over a wide variety of properly prepared and primed substrates including structural steel, cold rolled steel, aluminum, concrete, plastics and galvanized steel. In some cases it is self priming, but it is generally used as a topcoat over URETHABOND 104, URETHABOND 109, WEARCOAT 497, and WEARCOAT 499 primers.
-
URETHABOND 166 is a Two package aliphatic urethane, acrylic type, finish coating for exterior applications that can be applied over a wide variety of properly prepared and primed substrates including structural steel, cold rolled steel, aluminum, concrete, plastics and galvanized steel.
