-
THIOKOL FNEC 2515 is a 100% solids, two-component, flexible novolac epoxy coating suited for use on concrete and steel substrates. It provides protection from chemical attack and environmental degradation in primary and secondary containment applications. Recommended Uses: Above ground tanks Underground fuel storage tanks Tank bottoms Rail car linings Secondary containment Benefits: 100% solids, zero VOC formulation Excellent resistance to petroleum and urea ammonium nitrate (UAN) products Easy application ? 1:1 mix ratio, sprays in two 16?20 mil coats Flexibility beyond conventional tank linings High impact resistance -
THIOKOL FNEC 2515 is a 100% solids, two-component, flexible novolac epoxy coating suited for use on concrete and steel substrates. It provides protection from chemical attack and environmental degradation in primary and secondary containment applications. - 100% solids, zero VOC formulation - Excellent resistance to petroleum and urea ammonium nitrate (UAN) products - Easy application ? 1:1 mix ratio, sprays in two 16?20 mil coats - Flexibility beyond conventional tank linings - High impact resistance
-
THIOKOL RLP 2378+ is a highly elastomeric, two-component, 100% solids polysulfide based coating for a variety of surface applications. It provides an impermeable yet flexible membrane with excellent resistance to chemical attack and environmental degradation. - Impermeable yet flexible membrane - 100% solids, zero VOC formulation - Resistant to broad range of fuels and chemicals - Maintains elasticity at very low temperatures - Resistant to UV degradation - Excellent crack-bridging capabilities - Can be applied directly over elastomeric expansion joint sealants
+
-
A thin silicon based product designed to prevent the epoxy grout from bonding to the machine mounting surface during the chocking process. If used properly this product does not create enough buildup to create excessive puldown and loss of machine alignment. -
PS-100 WB is a two-component epoxy sealing primer designed to increase the adhesion and coverage of American Safety Technologies flooring products on concrete, wood, tile and other porous substrates. This low odor and low VOC formula make it ideal for use in kitchens, hospitals, and other odor sensitive areas. Easy to handle and apply, PS-100 WB penetrates deep into the surface ensuring good adhesion of the top coat. - Concrete Primer Sealer
-
We carry all the necessary hardware to support our pump systems in getting the grout product from the pump to the application area. This includes hoses, fittings, and cleanup wands to make sure the grouts are completely cleaned from expnsive high pressure hose systems.
-
We can supply power generation for our pumping systems for remote grout placement applications.
-
We can supply a high pressure wash system for the complete cleanout of mixing equipment after placement of epoxy and cement grouting systems.
-
We can supply all necessary hardware for the delivery of our grouting systems with a pump. This includes quick connect fittings such as cam & groove fittings in aluminum or plastic, hose clamps and all necessary hose requirements.
-
RezRok 105 is a highly workable epoxy patching compound used for a wide range of construction and structural repair applications such as bonding and patching where a paste consistency is required. - Anti-sag consistency at thicknesses to 1/4"; horizontal applications to 1/2" - Moisture insensitive - Excellent bond strength to concrete and steel Non-critical 1:1 mixing ratio`
-
RezRok 106 is a two component highly reactive polymeric adhesive formulated specifically for bonding applications as low 0? F. This unique formulation is used for construction and structural repair applications. - Ideal for applications where fast set is required - Contains no volatile solvents - Can be cured at extremely low temperatures and in damp conditions - Easy 1:1 mixing ratio - Good physical strengths and toughness - Low exotherm despite high reactivity - Excellent resistance to Non-critical 1:1 mixing ratio`
-
RezRok 150 is a versatile three-component polymer floor compound used for patching and topping concrete floors. It is packaged specially for convenience and ease of mixing. It cures quickly at ambient temperature for quick turnaround. - Fast setting for quick turnaround - Packaged for convenience, ease of use and easy clean-up - Excellent bond strength to concrete - Resists mechanical abuse and many chemicals - Contains no volatile solvents - Greater resiliency to concrete movement than cement-based products; won?t crack or shrink during cure - Can be applied in thicknesses from ?" to 12" - Ideal for plant maintenance, including small repairs Non-critical 1:1 mixing ratio`
-
RezRok 155 is a high performance epoxy grout used for supporting heavy machinery subjected to dynamic loading. This three component, 100% solids grout meets or exceeds most other epoxy and inorganic grouts in maintaining critical physical properties at elevated temperatures. - Outstanding dimensional stability - Maintains physical properties at elevated operating temperatures up to 180?F, a point at which many other grouts fail - Contains no volatile solvents - Fast curing property and high early strengths for shortened downtime and less cost - Resistant to most corrosive chemicals and oils - Excellent flowability without aggregate reduction
-
RezRok 157 is a multifunctional polymer grout formulated to provide maximum chemical resistance to 98% sulfuric acid and other aggressive chemicals. The grout combined blended filler and epoxy novolac resin with a special ?stress-relieving? additive to provide a durable and concrete compatible grouting material. - Withstands direct exposure to most inorganic acids (98% sulfuric acid, 100% phosphoric acid, 38% hydrochloric acid) and other aggressive caustics and solvents - Superior compatibility with concrete substrates - 100% solids, zero VOC formulation - Pourable consistency
-
RezRok 181 is a two component composite system for repairing and protecting substrates against course particulate abrasion and erosion. The system is based on toughened epoxy novolac resins and closely packed ceramic aggregates. - Excellent dry-heat abrasion resistance - Excellent impact resistance - Excellent chemical and corrosion resistance - Long working times - Cures down to 40?F
-
● Meets ANSI Z359.14-2014, ANSI A10.32-12 ● Compliant with OSHA 1926 Subpart M, OSHA 1910 ● ANSI Capacity Range: 130-310 lbs. ● Lightweight and Durable Housing ● Comes with Swivel Top Connection Point ● RFID Chip ● Gripping Snout ● Connector Material: Galvanized Steel ● Lifeline Material: Galvanized Steel ● For overhead use only ● Available in 20', 30' and 50' -
Used to seal the forming material to the subtrate to prevent material leakage during product installation.
-
Professional grade 10 oz. no drip gun with steel rovolving frame that allows cartridge to rotate for maintaining bead orientation. Aluminum alloy handle and trigger for corrosion resistance and a thermoplastic comfort grip with 14:1 squeeze ratio. Rod retracts after each pull of the trigger to help prevent dripping. Comes with ladder hook, spout cutter and seal puncture.
-
30 oz. heavy duty, professinal grade caulking gun. Convenient built-in spout cutter and seal punch. Fast flow system with rotating barrel. 13:1 ratio for operator comfort and product control.
-
General purpose Worm-drive clamps for firm hose and tubing. 410 Stainless Steel for good corrosion resistance. General Uses: - Attaching our layflat hose to our Quick-connect fittings for pumping grouts
-
We carry numerous designs of static mixer tips for every cartridge system we represent. Give us a call and we'll make the proper recommendation of static mixer for the product purchased.
-
General purpose static mixer tip for use with our bladder style injection port
-
General purpose static mixer tip for the use with our Dayton-Style surface ports
-
General purpose static mixer tip for use with our Five Star SLV product
