Friction Mobility Package
M1000 - Friction Drive Mobility Package adds wireless, independent mobility to the unit. Our system attaches two independent electric motors to the Mobile Grabber that drives its wheels, allowing you to position the Grabber without a vehicle attached. Note: Designed to be used on smooth level concrete surfaces. The Mobile Grabber Wireless Control Option W1000 - has taken all the functions of the standard corded remote and shrunk them into a compact wireless control. This state of the art unit provides all the needed safety features as well as seamless, instant control of the unit with a range of up to 100″. The Mobile Grabber Solar Charger S1000 - Harnesses the power of the sun to maintain the battery of the unit. Assuring maintenance-free performance, this system features high efficiency crystalline solar cells to provide greater power and state of the art electronics to control charging. The 60 watt crystalline solar panels are weatherproof and made with a rugged aluminum frame as well as shatterproof tempered glass for superior durability. The charge controller protects the battery from overcharge and discharge to ensure years of worry-free use. And best of all, the system is always working. The Mobile Grabber Spare Tire KitST1000 - Can be added to any existing unit. It can be ordered at the time of Grabber purchase or as a separate component later on. It is easily installed with a few hand tools. This option includes the spare tire and all needed hardware to mount the spare tire to an existing 1240, 1250 or 1260 model.The Mobile Grabber becomes even more versatile with the optional Confined Space Rescue/Retrieval kitR1000 - Now the convenience of having overhead fall arrest anchor points – anytime, anywhere – can be combined with OSHA required rescue/retrieval options for confined spaces. Each Razorback Rescue/Retrieval unit not only provides fall protection but also allows an attendant to rescue a worker in need by raising or lowering (bi-directional winching capabilities) them to a safe level.The Mobile Grabber Solid Tire OptionSPT1000 is great for sites that require puncture or rupture proof tires. *Not for highway use.The Mobile Grabber Grounding Lug Option
GR1000 offers two standardized studs for sites requiring electrical grounding. *Photo not shown.
-
The layflat hose is used to apply our epoxy and cement grout sytems in tight application tolerances. The hoses are available in low, medium, and high pressure capabilities. Call for a recommendation for the product you are choosing to pump. -
Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. This low pressure hose is used for the application of very flowable cement grouts only. Manufactured from PVC and has a service temperature of -5 Deg. to 170 Deg. F. Characteristics: - Material: PVC - Service Temperatures: -5 Deg. to 170 Deg. F - Pressure Ratings: 80 psi - Color: Blue - Compatible Hose Fittings (CamLoc Hose Barb)
-
We can supply all application tools necessary for the placement of our epoxy and cement grouts. This includes margin trowels, edging tools,
-
Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. This medium pressure hose is used for the application of flowable cement grouts and epoxy grout compounds. Manufactured from PVC and has a service temperature of -5 Deg. to 170 Deg. F. Characteristics: - Material: PVC - Service Temperatures: -5 Deg. to 170 Deg. F - Pressure Ratings: 150 psi - Color: Red - Compatible Hose Fittings (CamLoc Hose Barb)
-
When mixing small volume units of our products we offer polyurethne mixing tubs. Use with our contrctors mixing hoe.
-
The Grabber 1240 Mobile Fall Protection System provides two overhead anchor points - anytime, anywhere. The Grabber meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory. The versatile Grabber is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2 and the unprecedented maximum height of 30'. Characteristics: - Two (2) Fall Arrest Anchor Points for Simultaneous Tie-off - 30' Maximum Height Supports Wide Range of Uses - 100% Hydraulic Mast & Counterweight for Ease of Use & Quick Setup Time - Incomparable Mobility & Interstate Travel - 6' Wide Frame Makes Tight Areas Accessible - Ships Ready to Go - No Assembly Required! Mobile Grabber Options Friction Mobility Package
M1000 - Friction Drive Mobility Package adds wireless, independent mobility to the unit. Our system attaches two independent electric motors to the Mobile Grabber that drives its wheels, allowing you to position the Grabber without a vehicle attached. Note: Designed to be used on smooth level concrete surfaces. The Mobile Grabber Wireless Control Option W1000 - has taken all the functions of the standard corded remote and shrunk them into a compact wireless control. This state of the art unit provides all the needed safety features as well as seamless, instant control of the unit with a range of up to 100″. The Mobile Grabber Solar Charger S1000 - Harnesses the power of the sun to maintain the battery of the unit. Assuring maintenance-free performance, this system features high efficiency crystalline solar cells to provide greater power and state of the art electronics to control charging. The 60 watt crystalline solar panels are weatherproof and made with a rugged aluminum frame as well as shatterproof tempered glass for superior durability. The charge controller protects the battery from overcharge and discharge to ensure years of worry-free use. And best of all, the system is always working. The Mobile Grabber Spare Tire KitST1000 - Can be added to any existing unit. It can be ordered at the time of Grabber purchase or as a separate component later on. It is easily installed with a few hand tools. This option includes the spare tire and all needed hardware to mount the spare tire to an existing 1240, 1250 or 1260 model.The Mobile Grabber becomes even more versatile with the optional Confined Space Rescue/Retrieval kitR1000 - Now the convenience of having overhead fall arrest anchor points – anytime, anywhere – can be combined with OSHA required rescue/retrieval options for confined spaces. Each Razorback Rescue/Retrieval unit not only provides fall protection but also allows an attendant to rescue a worker in need by raising or lowering (bi-directional winching capabilities) them to a safe level.The Mobile Grabber Solid Tire OptionSPT1000 is great for sites that require puncture or rupture proof tires. *Not for highway use.The Mobile Grabber Grounding Lug Option
GR1000 offers two standardized studs for sites requiring electrical grounding. *Photo not shown.
-
We carry a complete line of mortar mixers for mixing our epoxy and cement grouting syatems and cement and structural concrete products. As small as a 7 Cu. Ft. portable unit all the way to a 20 Cu. Ft. mix station. We can also manufacture refactory mixers with replaceable liners for long running life to the mixing machine. These machines can be electric driven, gas engine driven, diesel engine driven, with manual or hydraulic mix and dump controls. Custom features include water bars for custom metering of water for volume mix designs, solid top fill grates to comply with OSHA onsite dust control for personnel safety.
-
Pro-Flex is a 100% solids, two component, low shrink, moisture insensitive, joint filler and crack repair material. Pro-Flex is used to fill joints in industrial floors exposed to hard wheeled traffic. Pro-Flex is useful for contraction/construction joints that are cut or formed. Pro-Flex may also be used for the repair of damaged or spalled cracks. Characteristics: - Pourable consistency - Low V.O.C. (0 g/l) Compliant with all Federal EPA, OTC, SCAQMD, and CARB regulations - Viscosity (Self Leveling) - 1:1 mix ratio - Self-priming - Moisture insensitive - Allows moderate joint movement - Does not weld slab joints together - Does not embrittle with age - Meets U.S.D.A. requirements for incidential food contact
-
A series of bulk caulking gun nozzle tips to aid in the application of the various products that be applied with a bulk gun. Nozzles include B-Line straight nozzles (Black or Clear), Bent cone nozzles, bendable alunimum nozzle, and replacement polyplastic piston packing and various repalcemnt parts for the gum including nozzles, barrels, pistons, repalcement pulls, handle & trigger assemplies.
-
A rubber loading sleeve that is installed over the threads of the bulk caulking gun for easy, repeated loading of the gun and keeps the application material out of the threads of the nozzle tip. Makes for a much cleaner installation.
-
A manual bulk dispensing caulking gun with a 12:1 thrust ratio for ergonomic user application comfort. Designed specifically for bulk dispensing of flexible joint sealants, and sealing mastics. This is an aluminum gun for user comfort and smmoth operation in the field. Accessories include rubber loading sleeve, standard 45 Deg nozzle, bent cone nozzle, bulk gun barrel brush, piston replacement kits.
-
A manual bulk dispensing caulking gun with a 12:1 thrust ratio for ergonomic user application comfort. Designed specifically for bulk dispensing of flexible joint sealants, and sealing mastics. This is a steel gun for rugged use in the field. Accessories include rubber loading sleeve, standard 45 Deg nozzle, bent cone nozzle, bulk gun barrel brush, piston replacement kits.
-
A two-component hybrid polymer flexible system with excellent self-leveling and ultra low viscosity properties. Its rapid cure properties allow the surface to be opened to traffic in less than one hour. Characteristics: - Low odor for interior application - Repaired cracks and spalls may be opened to traffic in less than one hour - High flexibility - Can repair asphalt based substrates - Waterproof - Chemical resistant - Stops corrosion within repaired area - Self-leveling - Ultra low viscosity (60 cps) for deep penetration into cracks - No primer required Uses Include: - Repair of potholes and large areas of broken concrete, asphalt, and control joints - Rehabilitation of bridge joints headers - Parking deck reconstruction
-
A two-component, 100% solids, high modulus, ultra low viscosity structural epoxy adhesive. Formulated for use as an injection or penetrating resin system for very fine to fine cracks (1/8" to 1/4" width) in concrete structures. Useable temperature ranges of 50 to 100 Deg. F. Cures to a solid with no shrinkage, and bonds to both surfaces of the crack, welding the structure back to its original monolithic strength. Characteristics: - Low odor for indoor applications - Self-leveling - Low viscosity (500 cps LR-321 & 200 cps LR-321LPL) - Low surface tension allows for deep penetration into cracks - Available in plural component cartridges or bulk packaging - Moisture insensitive for use in a damp enviroments
-
A two-component, 100% solids, high modulus, very low viscosity resin system for gravity feed or injection of fine to very fine cracks in horizontal concrete substarate. Product can be injected on vertical and overhead application with proper injection techniques. It is a moisture insensitive material and can be used in a damp envionment. Product can be used in temperatures from 50 to 100 Deg. F. Characteristics: - Very low vicosity (195 cps) - Moisture insensitive for use in damp environments - low surface tension allows for deep penetration into very fine cracks - Non-shrink and bonds to all surface of the crack - Available in plural component cartridges or bulk packaging Uses Include: - Pressure injection into very fine cracks or voids under machinery baseplates - Gravity feed of fine cracks or voids in structural concrete, masonry, wood, or machinery baseplates - Epoxy resin binder for mortar repair, patching, and overlays of interior surfaces - A sealer for interior and exterior, above-ground slabs, decks, patios, driveways, parking garages, and other concrete structures -shear fracture repairs of interior and exterior concrete slabs
-
A unique flexible port used for the injection of our cartridge resin systems on various substrates. This port includes a one way check valve to purge air during the injection process but closes when the resin system hits the valve. The bladder is designed to expand with the flow of resin product to maintain a positive pressure into the void area. Simple to distinguish the port that requires additional resins to complete the injection process. Will not over-pressure a void area to create baseplate distortion.
-
Machine Suppport Technologies represents a number of pump manufacturers for the application of our resin systems. We also represent various manufacturers for the pumping of cement grout, epoxy grout, and floor overlays and underlayments. Each pump is designed for a specific application. They include: - Resin Injection - IP2C Gel Injection Pump - IP-GT1C-SS Polyurethane and Epoxy Pump - IPGT2C GeoTech Injection Pump - IP-GT3C-SS GeoTech Injection Pump - JointMaster Pro2 G3i Digital f2002 Injection Pump for Crack and Joint Fill - PA 3000 Epoxy Injection Pump -P 3003-2C Polyurethane & Epoxy Pump - IP495 Injection Pump Controlable Discharge Pressure, and the HP100 Hand Pump
-
A rigid port used for the injection of our resin cartridge systems on various substrates. This port will accept direct injection of our resin cartridge systems via a black & blue quick connect for multiple ports or direct connection of the static mixer when using a cartridge system.
-
Crack Repair SLV is a very low viscosity, two-component hybrid polyurethane specifically engineered for use as an easy to apply, rapid curing concrete repair material. Its low viscosity offers deep penetration into hairline cracks for concrete structural repairs and the addition of a specialty aggregate allows for very fast turnaround large spalls, fractured joint repairs, or holes left by previous mechanical anchor systems. Characteristics: - Very low viscosity (60 cps) - Can be used in temperatures from 0 to 115 Deg. F - Self-leveling - Solvent free - No V.O.C. - Rapid set, fast turn-around - Packaged as a plural component cartridge for easy installation Uses Include: - Industrial and commercial floor repair - Spall repair when used with a specialty aggregate - Fill very fine cracks in concrete substrate - Interior and experior applications with minimal UV color change - Rebonds concrete surface to makes a continuous surface for weight loading
-
HP Anchor Gel is a 100% solids, all weather, solvent-free, structural epoxy acrylate anchoring adhesive. Using the latest technology, Five Star HP Anchor Gel, has been engineered to be applied at temperatures below 0 (-15?F [?26? C]) , set up quickly in damp and/or water-filled holes and attain excellent bond strength to smooth diamond core drilled holes. Characteristics: - Meets the performance requirements of ASTM-C-881, Types I, II*, IV & V*, - Classes A, B & C, Grade 3 (*with exception of gel time). - Moisture intolerant, Sets up in water-filled holes - Bonds to smooth diamond core drilled holes - Cold weather installation down to -15?F (-26?C) - Styrene free formulation - Underwater anchoring adhesive - Packaged in plural component cartridge for easy application
-
A two-component, 100% solids, moisture insensitive, structural epoxy adhesive used to fill cracks up to 1/4" in width. The LV adhesive is a very low viscority epoxy system that can be gravity fed or pressure injected into cracks and voids. The LV adhesive can also be used as a buinder for making an epoxy patching mortar using an aggregate extension. Characteristics: - Low viscosity for deep penetration into cracks or voids - Moisture insensitive for use in damp enviroments - High modulus structural adhesive - High strength properties - Excellent adhesion to concrete, masonry, wood, steel, and most structural materials - Meets USDA specifications for use in food processing areas - Low odor - Meets ASTM C881 Types I, II, IV, and V, Grade 1 Class B & C Uses Include: - Gravity feed of large cracks in horizontal concrete and masonry - Pressure injection of cracks in structural concrete, masonry, wood, and other substrates up to 1/4" wide - Pressure injection of vertical and overhead cracks with proper application techniques - Sealing tunnels, cable vaults, tanks, and basements - Seal interior slabs and exterior above grade slabs from water and chlorides - Binder for an epoxy patching mortar of interior horozontal surfaces
-
A two-component, multi purpose, moisture insensitive, structural adhesive used for filling cracks on concrete and masonry up to 1/2" in width. The PolyFlex Gel is a smooth, non-abrasive that can be hand appied or pressure injected. It is formulated to react with water water to form a hydrophilic polyurethane foam that molds to substrate and stabilizes surronding soil. It will continue to cure with water and swell into a rubber-like polyurethane foam. Characteristics: - VOC compiant - Excellent adhesion to masonry, concrete, wood, steel, and most structural materials - High strength properties - Convenient 1:1 mixing ratio - Moisture insensitive - Unique non-abrasive texture permits applications with automatic dispensing equipment for pressure injection Uses Include: - Sealing jacket seams - Pressure adhesion of masonry, concrete, wood ans other substrates - Surface repair of non-moving cracks on new or existing structures - Anchoring of bolts, dowels, pins, and specialty fasteners - General purpose gel adhesive - Re-pointing concretye block and timbers for drydock applications
-
A single component, 100% solids, flexible, low viscosity, injection resin for water stopage in concrete, masonry, and sandy soil structures even when strong seepages or gushing leaks are entountered. Its reaction with water results in the formation of a flexible polyurethane which forms a hydrophobic and chemically-resistant barrier. Characteristics: - Rapid water tight seal formation - Forms a hydrphobic and chemically resistant barrier - Remains flexible without further shrinking or swelling - 100% solids - Adapatable reaction time with the use of an accelerator - React s with water - Low viscosity Uses Include: - Concrete and masonry retaining walls - Sea-walls of various substrate - Box culverts - Tunnels - Pipe penetrations in concrete, masonry, and soil substrates - Concrete tanks - Concrete clarifiers
-
This product is designed to help accelerate the reation time and expansion rate of the of the PolyWatercut product. Characteristics: - 1% Addition (1.5 oz. to 1 Gallon) = 90 second initial reaction time = 5 min. 30 sec set time = 13.5 times expansion - 10% Addition (13 oz. to 1 Gallon) = 12 second initial reaction time = 30 second set time = 29 times expansion