-
Structural Concrete V/O (Vertical/Overhead)- A high early strength, single component, rapid setconcrete repair material for vertical and overhead applications. Produces a repair that is dimensionally stable, develops an integral bond to existing concrete, and restores structural integrity within hours of placement. Application thicknesses for ? to 2 inches neat and over two inches with choice aggregate extensions. Product creates corrosion protection of steel reinforced structures with mitigating corrosion inhibitor technology and has very low chloride ion permeability. Moisture sensitive coatings can be applied in 8 to 24-hour dependent on ambient conditions. -
Cementitious Underwater Groutia a pumpable Underwater Grout. Five Star Cementitious Underwater Grout is an underwater pump grade, cement-based, non-shrink grout. It is designed for applications including pile repair and restoration, grouting underwater, grouting areas subject to saltwater exposure, and installation of anchors and dowels. Characteristice Include: - Placement via tremie or pump - Salt and seawater resistant - Non-ferrous, Non-corrosive - Locally manufactured under strict quality control standards - Non-shrink from the time of placement Uses Include: Pile repair and restoration, grouting underwater, offshore tidal zone areas, grouting areas subject to saltwater exposure, installation of anchors and dowels, etc.
-
Safe for use with machinery and components that come into contact with potable water. Five Star® Fluid Grout 161 is a UL classified cement-based, nonmetallic, non-shrink fluid grout for supporting machinery and equipment in environments that may come into contact with potable water. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star® Fluid Grout 161 exhibits positive expansion. Five Star® Fluid Grout 161 meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-14 and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40°F - 90°F (4°C - 32°C). Advantages Cement Grout (UL/NSF ANSI 61) Specifications Tested and certified to NSF/ANSI 61 for use in applications that may come into contact with potable water Air release technology per ACI 351.1 R Placement within tight clearances down to 1/2 inch High 1, 7 & 28-day strength Permanent support for machinery requiring precision alignment Does not contain gas generating additives, such as aluminum powder Non-shrink from the time of placement 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures Uses Grouting of structural baseplates, anchors, dowels, connections and skid mounted equipment associated with: filter bed trays, small pumps/motors, cross-screw conveyors, centrifuges, residuals handling and other water treatment systems Annular space grouting for sliplining and pipe rehabilitation Grouting of machinery and equipment to maintain precision alignment Non-shrink grouting of structural steel and precast concrete Grouting of drinking water system storage and transportation components such as tanks, vessels, and pipelines -
A heavy, single component putty used to help stop the leakage of epoxy and cement grouts during their applcation. -
We carry various products to apply to the forming system to allow for easy removal of the forms after application of the cement or epoxy grout. This includes high temperature Non-melt grease, paste wax, polysheeting and spray adhesive, melamine board, etc. Call us with your application for a recommendation.
-
This includes various length screws for the general construction of wood and styrofaom forms to the attachment of the forms to the concrete substrate for the installation of our epoxy and cement grouts.
-
An absorbant polymer crystal designed to absorb high volumes of liquid into itself. This allows the liquid and any contaminates housed within, to be removed/transported in a much easier and affordable way. Unlike other solidification media such as saw dust, Portland Cement, Kitty-litter, Dri-Rite, or kiln dust the Genesis chemically bonds with water and it will hold it under pressure while only adding minimal mass. General rule is that the Genesis product can absorb up to 400 times its volume.
-
We carry various pumping systems for the application of our cement and epoxy grouts. These pumps are small in physical project footprint and delivery our grouts in a convenient and cost savings method for large volumes of product. Manufacturers include Graco, Machine Technologies, EZG manufacturing, Putzmeister, Blastcrete,
-
We can help the project designer or contractor design a headbox system to help in the placement of epoxy and cement grouts under tight gaps and long distances. It's vital to understand the dynamics of hydraulic weight of epoxy and cement grouts.
-
Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. This high pressure hose is used directly out of the pump to prevent the pinching of the hose during reloaction of hose during application. The pinching of the hose can lead to hose "blow-out" and make e real mess on the jobsite.
-
For use onsite to aid in the clean-out of mortar mixers and pumps after product application and create an environmental control.
-
We carry a number of surface port styles designed for each application. It is highly recommended to call one of our field technicians with your applicaation for proper port design. Ports include standard plastic surface ports, bladder style ports, spring ports, rubber-band ports, mechanical packers, hammer in packers, adhesive style insert ports, corner ports.
-
Ceramic Repair Liquid is a unique ceramic filled, high build, brushable epoxy coating for severe errosion and wear areas of operating equipment and process systems. Formulated for unequaled chemical and corrosion resistance with outstanding wear properties under adverse enviroments. Characteristics: - can be mixed and appied with simple hand tools - high chemical and corrosion resistance - can be used as a lining materials for severe enviroments - commonly found in chemical plants, power planys, pulp & paper mills, mining operations, water treatment plants, other industrial and marine applications -
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting severely errosion damaged areas of operating machinery and processing equipment exposed to corrosion, errosion, cavitation, chemicals, and acids. Characteristics: - can be mixed and applied with simple hand tools - can be used in temperature ranges up to 350?F - excellent for filling voids and rebuilding metal castings - Qualifies under Mil Spec DOD-C-24176B(SH) Type I II - Open Time: 25 Minutes - Gap Fill: from 1/16" (.0625") up to 3/4" (.075")
-
Fiberglass cloth is a woven material available in various sizes to allow for custom strengths, thicknesses, and wieght in projects. Our fiberglass cloth is a 6 oz. dual weave cloth that provides grat strength and durability when layered with our resin systems to form a hardened composite. This six once cloth is 3.9 mils thick. Characteristics: - available in 1", 3" and 6" wide rolls x 50 yards long - fiberglass cloth provides greater tensile strength than steel wire of the same diameter - excellent fire and heat resistance - thermal conductivity (making it useful for insuation applications) - excellent chemical resistance properties similar to hardened glass - durable and economical
-
PHILLYBOND #6 is a two component high strength epoxy paste used for the repair of punctures or cracks in tanks, pumps, pipes, steam lines, sea chests, valve bodies, etc., at temperatures up to 220?C (428?F). The material is also used to fill holes, voids and to provide a smooth surface for repairs with our PHILLYCLAD #8 and glass tape. PHILLYBOND #6 is resistant to most acids, alkalies and hydrocarbons and will adhere to clean surfaces such as steel, cast iron, bronze, aluminum, copper, nickel, wood and most plastics. Characteristics: - simple hand mixing process - can be mixed and applied with simple hand tools - resists high temperatures - resistant to most acids, alkalis, hydrocarbons, etc. - will adhere to various substrates such as steel, cast iron, bronze, aluminum, copper, nickel, wood, PVC pipe, and most plastics.
-
Phillyclad #8 is a two-component, fast setting epoxy laminating resin system for high strength fiberglass reinforced repairs to pipes, tanks, vessels, and other equipment that is subject to corrosion or errosion. This product is capable of high temperature applications (428 Deg. F) and can withstand pressures up to 1000 psi. Characteristics: - easily mixed and applied with simple hand tools - high pressure resistance (1000 psi hydrostatic in one hour) - high temperature resistance (428 Def. F) - rapid cure - resistant to salt water, fresh water, crude & refined oils, gasoline, jet fuels, caustics, and most acids Uses Include: -PVC pipe repair, cargo heating coils, steam pipes, turbine drains, electrical conduit for moisture sealing, tanks, valves, vessels, and other equipment subject to corrosion and errosion during the operating process.
-
PHILLYBOND #6 is a two component high strength epoxy paste used for the filling of severe erosion areas of pump case castings, filling of large cracks in tanks, pumps, pipes, steam lines, sea chests, valve bodies, etc., at temperatures up to 220?C (428?F). The material is also used to fill holes, voids and large offset in screw or welded pie fittings prior to the application of our PHILLYCLAD #8 and glass tape. PHILLYBOND #6 is resistant to most acids, alkalies and hydrocarbons and will adhere to clean surfaces such as steel, cast iron, bronze, aluminum, copper, nickel, wood and most plastics. Characteristics: - simple hand mixing process - can be mixed and applied with simple hand tools - resists high temperatures - resistant to most acids, alkalis, hydrocarbons, etc. - will adhere to various substrates such as steel, cast iron, bronze, aluminum, copper, nickel, wood, PVC pipe, and most plastics. - can be worked with water to provide a very smooth surface and offset transition
-
Phillybond Blue 6A (Repair Compound) is a two component epoxy paste developed specifically for filling, smoothing, and fairing applications on metals, fiberglass reinforced plastics (FRP), plastics, wood, concrete, and masonry. The smooth consistency and non-sagging properties make this product unexcelled in leveling rough or pitted palting, forming fillets and coves, smoothing weld seams, etc. This product has exceptional troweling and application characteristics that provide a smooth finished surface for the application of primer systems and finish top coats. Characteristics: - non-toxic - contains no solvents - non-sag - can be mixed and applied with simple hand tools - cleanup is with soap and water - can be faired to a feather edge - easily ground or sanded with air or electric hand tools - excellent chemical resistance to salt water, fresh water, crude and refined oils, gasoline, jet fuels, turbine oils, - resistant to most other chemicals found in an industrial, commercial, aerospace, or marine enviroment Uses Include: - pump casings (internal and external), impellers, sea chests, condensor boxes, heat exchangers, uneven hull and deck plating, thru hull fittings, cavatation damage, repair and sealing of riveted seams, automotive, aerospace, architectural, commercial, and marine applications.
-
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting severely errosion damaged areas of operating machinery and processing equipment exposed to corrosion, errosion, cavitation, chemicals, and acids. Characteristics: - can be mixed and applied with simple hand tools - can be used in temperature ranges up to 350?F - excellent for filling voids and rebuilding metal castings - Qualifies under Mil Spec DOD-C-24176B(SH) Type I II - Open Time: 25 Minutes - Gap Fill: from 1/16" (.0625") up to 3/4" (.075")
-
PHILLYBOND TA-30 is a two component, high tack strength, epoxy adhesive specifically developed for the installation of vibration damping materials such as MLD-2 Tiles, RA, Saper, Isoper, PVC and other specialty design tile systems. Clamping or shoring is generally eliminated as TA-30 Adhesive will support in excess of 25 kg/sq.m. (5 lbs./sq.ft.) on overhead and vertical surfaces while curing takes place. TA-30 is excellent for grouting between damping tile sheets and for forming fillets at welds or seams. TA-30 is nontoxic and contains no solvents. Fumes and odors of mixed TA-30 are negligible thus facilitating usage in confined areas. Resistance to fresh water, salt water, crude and refined oils, gasoline, jet fuel, etc., is excellent. Characteristics: - 1:1 ratio mix - simple mxing and application process - non toxic - low odor - contains no solvents - will support 5 lbs/sq.ft. on overhead and vertical surfaces while curing - high resistance to salt water, fresh water, crude and refined oils, gasoline, jet fuels, etc.
-
Our ITW Titanium Repair Compound is the latest in high technology, high bond strength repair system. The Titanium Repair Compound formulation was created thru state-of-the-art computer modeling to provide the industry with fast, permanent repair to equipment that might otherwise require costly downtime. This resinsystem is the ideal solution to joining dissimilar metals such as iron, steel, aluminium, tungsten carbide, brass, zinc, and zinc alloys without the problems of galvanic corrosion. Characteritics: - adheres tenaciuosly to properly prepared surfaces - can be mixed and applied with simple hand tools - hardenes to a rigid metallic mass which permits drilling, tapping, and machining with ordinary metalworking tools - creates an intergral bond, maintaining a high level of resistance to impacy and abrasion - high resistance to chemicals -high service temperature resistance (250 Deg F.) - rapid cure
-
A specialty designed mixing blade used to help eliminate entrained air in the pre-mix of our two component resin grout systems and efficiently mix our two component coating systems for surface application. -
A specialty mixer designed to mix 5 gallon buckets of finished product. This is used for our Chockfast Blue and Gray epoxy grout compounds, the RSR surface repair system, or premixing the "A" & "B" components of our Escoweld 7505E and CWC 604 epoxy grout compounds. Call for a recommendation of product capability.
