-
Waterborne epoxy primer, primer/sealer for concrete substrates, promotes adhesion of various topcoats including polyurea/polyurethane elastomers, can be used on dry or damp concrete -
High Build, Modified Epoxy "Chaulk", good overall chemical resistance and versatility, tank lining applications for transition areas, floors, walls, lap welds, pitted steel, bolts, etc. Ideal for relining or reconditioning older tanks
-
High solids, epoxy surfacer, excellent adhesion to concrete, can be spray applied, squeege, or trowel. Used on concrete or masonry block, provides suitable substrate for application of recommended topcoats in a continous film, free of pinholes and holidays. Not recommended for applciations on wet substrates or at temperautre below 50 Deg. F
-
Modified Phenalkamine, surface toleerant, epoxy specially formulated for Marine or Industrial environments. Suitable for fresh and salt water immersion resistance, good for temperautre down to 0 Deg. F, applicator friendly.
-
Solvent Free Epoxy Patching Compound, concrete and masonry
-
Waterborne Epoxy Patching Compound, concrete and masonry, damaged cocnrete, fills large cracks, wall floor transition coving, sloping material for floor transitions
-
Spray Grade version of the 510 product, deteriorated concrete in the Waterwater environment, provides protection from H2S attack or MIC
-
Waterborne Epoxy Primer, good chemical resistance, better film hardeness as compared to straight acrylic or acrylic-epoxy systems
-
Solvent free, plural component spray applied, commonly used in tank lining applications
-
High Solids, Versatile, Corrosion Resistant Coating,used as a primer, imtermediate coat, or self priming finish over steel or inorganic zinc primers
-
High Solids, Versatile, Corrosion Resistant Coating,used as a primer, imtermediate coat, or self priming finish over steel or inorganic zinc primers (Low HAP's and Silica Free)
-
Specially formulated, High Solids, Versatile corrosion Resistant coating designed as a weathering finish for exterior use. It will freely chaulk on UV exposure to maintain a white appearance over its useful life.
-
High Solids, Corrosion Resistant coating for potable water lining of tanks and pipelines, good adhesion propeerties
-
Versatile Epoxy-phenalkamine for low temperature cure capabilities, quick recoat time, 6 month recoat window for atmospheric use, can be used in immersion service
-
High Abrasion version of the 635 coating. Versatile Epoxy-phenalkamine for low temperature cure capabilities, quick recoat time, 6 month recoat window for atmospheric use, can be used in immersion service, outstanding moisture tolerance during application, very fast cure
-
All purpose innersion grade epoxy, same propertiers as the 635 coating, low tempereature cure, surface tolerance, fast recoat, moisture tolerant, Low VOC and Low HAP's, available in custom colors
-
Epoxy-Phenalkamine is a self priming finish, excellent corrosion protection, moisture tolerant both during and after application, cure down to 20 Deg. F, available in custom colors
-
Glass flake version of the 690 coating, used for severe service conditions, marine and sub-sea or splash zones
-
High-Performance immersion grade epoxy, excellent resistance to water, salt water, municipal wastewater exposures, moisture tolerant during application low temperature cure, suitable for potable water use
-
Solventless, clear epoxy lining that utilizes a reinforced mat, complies with API RP652 for tank bottom lining repairs
-
Solventless epoxy patching mortar to coat tannk rivets, lap welds, floor/wall interfaces, wall covings for use in tank lining systems
-
Epoxy Polyamide, high solids, low VOC, quick cure, high build, excellent chemical and abrasion resistance, fast dry intermediate epoxy, excellent edge protection capabilities, complies with MIL-DTL-24441D, Type IV
-
Epoxy Non-skid for steel, galvanized, aluminum, and masonry, good chemical resistance, for marine or industrial environmments, cure to 35 Deg. F temperatures
-
Alternative to the 868 Non-skid with lower profile, non-sparking aggregate
