Servicing:
Southern California,
Southern Nevada, Arizona, Alaska, Hawaii
Industrial Floor Coatings
For updated MSDS Sheets - Please call us at 661-399-7781
Impax® 5020
A trowelable epoxy surfacing and leveling compound for new and old floors of concrete, wood or steel where a high degree of chemical and abrasion resistance is required. The physical properties of IMPAX 5020 FLOOR RESURFACER are much higher than those of concrete and its excellent abrasion and impact resistance recommend it for high traffic areas.
Impax® 5020 AR
Acid Resistant Epoxy Floor Resurfacer. A trowel-applied, acid resistant, novolac epoxy resurfacing and leveling system for protecting concrete, wood and steel in many corrosive environments. The high build finish is durable, anti-slip and cures quickly to reduce downtime.
Impax® HPU
High Performance Urethane. An interior/exterior, high solids, chemically resistant, polyester aliphatic urethane floor coating. High gloss finish - abrasion and stain resistant, superior color retention and chalk resistance, anti-slip finish available, easily applied by brush, roll, or spray
Impax® 650 FS
Fast Set Self Leveling Epoxy. A two-component, 100% solids, high-performance, self leveling floor coating designed to cure rapidly for fast recoat or minimal downtime, while maintaining most of the physical properties of the standard IMPAX 650 SL.
[Technical Bulletin] [MSDS Sheets] [Case Study]
Impax® 650 SL
Self Leveling Epoxy. A two-component, 100% solids, high-performance self leveling floor coating specifically designed to provide an extremely hard wearing, durable, high gloss, seamless, hygienic surface.
Impax® 700
High Solids Water Based Epoxy. A two-component, water based, epoxy floor coating specifically designed to provide an attractive, uniform appearance in industrial environments with moderate to high traffic and moderate chemical exposure. The high solids formulation is low odor and low VOC.
Impax® 100
One-Component Epoxy Anti-Slip. A single-component, epoxy ester anti-slip floor and deck coating for areas of heavy pedestrian grade traffic. The light duty safety coating offers optimum adhesion to metal, concrete and wood surfaces.
Impax® 300
Heavy Duty Epoxy Anti-Slip. A catalyzed epoxy anti-slip coating exhibiting superior chemical resistance to acids, alkalis, solvents, fuels, etc. Easy to mix and apply, this anti-slip coating can be applied to concrete, steel and wood.
Impax® 3300 LVN
High Solids Clear Epoxy Primer. A clear, high solids, high build, low viscosity primer designed for use with clear finish coats or any of the DecoBlend™ systems. The penetrating primer’s formulation is fast curing, low odor, VOC compliant and reduces bubbling and pinholing that occur when coating porous substrates.
Impax® Water Base Clear
Clear Epoxy Primer. A thin film, two-component, clear water based epoxy primer/sealer designed for use with most high performance floor coatings.
[Technical Bulletin] [MSDS Sheets] [Case Study]
Impax® Water Base Gray
High Solids Gray Epoxy Primer. A lead and chromate free, rust inhibitive, two component epoxy primer specifically designed for use in conjunction with Philadelphia Resins coatings applied to metal substrates. It also meets USDA standards for maintenance protective coatings not in direct contact with food infederally inspected meat and poultry plants.
Impax® Rust Inhibitive Primer
A lead and chromate free, rust inhibitive, two component epoxy primerspecifically designed for use in conjunction with Philadelphia Resins coatings applied to m+etal substrates.It also meets USDA standards for maintenance protective coatings not in direct contact with food infederally inspected meat and poultry plants.
Impax® Flexible Joint Sealant
This is a two-component, 100% solids, polymer hybrid containing both urethaneand epoxy resins that provide a resilient filler for expansion joints. This chemistry allows excellent flexuralstrength and elongation while maintaining impressive tensile strength. It has good adhesive strength andflexibility over a wide temperature range.
